Caring for Wool Sweaters

Wool is a marvelous fiber. It's comfortable, warm, and attractive. However, if not cared for properly, it can shrink, lose its shape and sometimes even unravel completely. In order to prevent this from happening, wool sweaters should be cared for in very particular ways.

Wool sweaters should not be cleaned too often. Excessive cleaning can break down the wool fibers. Only wash your sweater when absolutely required. When you do wash your sweater, it is probably best that you follow the care instructions on the tag. Most tags will indicate that your wool garments should be dry cleaned.

However, it is possible to wash your wool sweaters and other garments in the washing machine. If you choose to do this, use a mild detergent that is specifically formulated for wool. Biological detergents, or anything that contains bleach, will be disastrous to wool fibers. Read all the fine print of your favorite detergent to determine if it’s safe for your wool sweater.

Select the slowest spin speed and lowest temperature possible when machine washing any wool garments. Higher spin speeds could cause your sweater to stretch, while hot water can shrink your garment beyond all repair. If your machine has a wool care setting, use that. Otherwise, a cold water delicate wash will usually suffice.

Do not dry your wool garments in the dryer. Any heat applied to wet wool can (and usually will) cause shrinkage. Instead, lay your wool sweaters flat to dry. You can purchase a rack for drying your sweaters that allow them to be laid flat while permitting airflow from all sides. The wool will dry quickly and your sweaters will maintain their shape. If you notice that your sweater is slightly out of shape, stretch it gently before it’s dry.

Pilling is a common problem with wool sweaters, and it really cannot be avoided. This makes the sweater look untidy and a little ratty. However, when you do notice little pills and bobbles appearing on your sweater, you can treat the sweater by either plucking the pills off with your fingers or shaving the sweater gently. After a few washes, pilling will become less of a problem.

Wool sweaters are very attractive for moths, and once eggs are laid and the larvae hatched, they feed on the wool fibers. Most people would reach for the mothballs, but these can actually damage your wool sweater. Instead of mothballs, consider storing your wool sweater wrapped in plastic and sprinkled with lavender.

For more long-term storage, consider placing the lavender in a sachet with rosemary and dried orange peel. Place this near, but not on, your sweater to avoid any possible damage. Then place both the sweater and the sachet into a cardboard box, canvas or muslin bag, or simply wrap in an acid-free tissue paper.

The better you care for your sweater, the longer it will last. Clean your sweater only when necessary, store it carefully, and rinse any stains immediately with cold water. You should get years of life out of your wool sweater if you're careful.

First published as How to Care for Wool Sweaters

How to Embroider Faces on Cloth Dolls

There are many methods by which you can stitch the face onto a cloth doll. It can be done before the doll is assembled, during assembly, or after the doll is completed. Most of the time, it is easier to stitch the face onto the doll after the doll has been stuffed. This allows you to place the face exactly where you wish and the firm surface means your stitches will probably be more even. If you’re hoping to stitch the face onto a cloth doll, there are certain steps and tips that will make the process easier.

Thread Selection

When choosing a thread, the type and content of the thread is not nearly as important as its thickness. You’ll have to select a thickness that matches the size of the doll. For most dolls, embroidery thread will do. Depending on the delicacy of the doll, you may have to split the thread three times or more. For very large dolls, you may have to use wool. Choose a thread that gives you the desired results. A thread that is too thin won’t show up and one that is too thick will make your doll look chunky.

Creating the Face of the Doll After Stuffing the Head

If you’re stitching onto a head that is already stuffed, you’ll have to use stitches that allow you to conceal the end of the thread. If the head is not already attached, consider sliding the needle inside the head to start your stitches. The thread will be hidden inside the doll. As an alternative, you could a double stitch on the outside of the doll. This encases the thread, not only hiding the end but preventing the threads from being pulled out. There is nothing as annoying as finishing your embroidery and having the entire thing unravel.

Start by drawing the face on the head with a thin felt tipped pen. You should use a washable pen just in case you make a mistake. When you’re satisfied with the face, select the specific thread colors you’d like. Typically, a doll will have red lips, dark pink nose, and black or brown eyes and eyebrows. However, the colors you select are highly dependent upon the style and type of doll. Select the colors that work best for your project.

Thread a sharp needle of the appropriate size and, if you do not wish to use a double stitch, go through the neck area of the stuffed head. Pull the thread up into the area to be embroidered, but hold on to the very end. You don’t want to pull it all out and have to start again. Resist the temptation to secure the thread by tying a knot in the end of it. Eventually this knot will work its way through the fabric, unraveling your embroidery. You have to secure the thread by stitching it into the stuffing.

To define the shape of the eyes, you must use a chain stitch. Do this by pushing the needle down into the face and back up though the face in the same movement. The stitch length should be small and neat. Before pulling the needle through and completing the stitch, wrap the end of your thread around the needle. When you pull the need through, it will form a chain. Additional stitches are completed in the same manner. When you’ve reached the beginning, draw the thread back into the head of the doll and down through the neck. Secure the threads with a double knot, pulling them taunt but not enough to crease or pucker the face.

The eyeballs are created using straight stitches in whatever manner best suits your doll. The nose can also be worked with straight stitches, and chain stitches once again for the mouth. Eyebrows are also usually worked in chain stitches, though if you want thick eyebrows, consider a few rows of straight stitches. Stitches are all secured in much the same manner as the eyes were, by drawing the threads though the neck.

Creating the Face of a Finished Doll

The stitches remain the same for a finished doll, but everything else is different and infinitely more difficult. You can try to put the needle through the back of the head, but you’ll have to use a needle long enough to ensure you get the placement right. A double stitch can be used to secure the thread on the front of the face, but in all other respects the stitching remains the same. This method is more difficult simply because it is harder to secure the thread. Hence the double stitch.

If stitching a face onto a finished doll is too complicated (and it often is), consider using appliques on larger dolls. You can make your own appliques out of bits of felt. In areas too small, you may have to use a permanent fine tip pen to create the look you want.

Creating the Face Before Stuffing the Head

If you want to stitch the face before assembling the doll, invest in a darning mushroom of the appropriate size. You can stretch the fabric over the mushroom and position the face correctly before you stuff the head. Darning mushrooms are available from most craft supply stores.

Using embroidery to create the face of a doll is both beautiful and safer. Faces created with beads, jewels, or other items can present a choking hazard for young children. Instead of creating something that might pose a danger for your children, considering embroidering the face of a doll. With a little practice, you will become a master of this delicate art.

First published at Helium: How to Embroider Faces on Cloth Dolls

Making an Art Smock for Your Child

The kids just went back to school, and that means I've been busy. Each year the school supply lists come home filled with things you can and sometimes have to make at home. Bags on hangers. Drawstring gym bags. Art smocks. The list goes on and on. I have two children in elementary school and both of them need things made every year. And because I'm well known as a seamstress, many parents from the school ask me to make things for their children.

The most popular item I've been asked to make this year is the art smock. The supply list says to use an old T-shirt, but not a single child wanted to be caught in a dirty old shirt, starting with my own seven-year-old. So the art smock got my attention this year.

I, of course, started with the smock for my own son. He had some specific requirements. It had to have "jaggy edges", it had to have holes under the arms so he wouldn't get sweaty, and he had to be allowed to paint it. Knowing it had to last the year, I chose a light denim to work with. He wouldn't be too hot and it would last.

So how to you make a smock for a child? With four pieces of fabric, some thread, a good length of elastic, and a sturdy sewing machine. To make one yourself, follow the directions here. Consult the rough sketches if you need a little help. These instructions assume you've done things like insert elastics and sew seams. Detailed directions for these things will not be given.

1. Start by measuring your child (all in inches). Measure the width of the child's torso (A), top of shoulder to top of knee (B), and top of shoulder to wrist (C).
2. Cut two pieces of fabric measuring A+20 inches wide and B inches tall. These will be for the body of the smock.
3. Cut two pieces of fabric measuring 24 inches wide and C+6 inches tall. These will be for the arms of the smock.
4. Lay out the fabric as the diagram suggests, keeping right sides together. Each sleeve piece should be folded in half to make a single sleeve. Raw edges should face down.
5. Study the sketch carefully. Notice the diagonal lines drawn on the pattern. Duplicate these, measuring 6 inches across and down from each corner indicated on the diagram. These lines will be exactly where your seams are.
6. Pin the required pieces of the pattern together, right sides together, lining up the lines you drew in Step 5. You should have four seams. Sew them together.
7. You should now have something that looks a little too big. That's okay. Keeping Right sides together, stitch the side seams. Start at the wrist area and sew until you get to the bottom edge of the smock. Then stitch the other side. If you want to give your child more room, sew only to just past the hip area on both sides.
8. Now you'll need some elastic at the wrists. Measure carefully. You don't want to make the wrists too tight. Sew a channel for the elastic, leaving a large enough space to pass a safety pin through. Attach the elastic to the safety pin and thread the pin through the channel. Once you have the elastic in place, sew the ends of the elastic together so it doesn't come out again (because that would mean you'd have to start over and that's annoying). Repeat on the other side.
9. Now you have to decide how to finish the piece. Start with the neck. If you notice in the picture at the top of the post, I just hemmed the area. No elastic, nothing fancy. You can do the same. You can also add an elastic if you want to tighten up the neck, but I tend not to. It's easier for the kids to get the smock over the head if the opening is large.
10. For finishing the other areas, I used pinking sheers to cut out holes under the arms (you don't have to do this; my son asked me to). I also cut around all the unfinished seams (still using the pinking sheers) to give it a "jaggy look" just like my son asked for. I frayed the edges a bit and used a decorative stitch just to make sure the denim didn't unravel.
11. Finally, my son broke out the fabric paint. He wanted it to look like he'd just come away from the paint table, so he put lots of paint splotches on it. He also added his name.

And voila! He had an art smock. Apparently all the kids loved it because I've made 11 more, all in the same style (though fabrics have differed). I've also provided fabric paints for each child. They decorate the smock when the come pick it up, then play with my kids while the paint dries. Tons of fun for everyone!

This project is easy to do yourself, though most people don't. It can be made with more fabric, increasing the width of the body pieces and giving it a more 'flowy' look. I do this for the girls so they have something that flounces. For the boys (like my son) something more streamlined works better.

Sewing a Stitch & Trim Seam

There are many types of seams, some more common than others. While the plain seam is the most common, it is also over-used by amateurs. A plain seam is only suitable for delicate fabrics that will not fray. If you're using a delicate fabric that might fray, the classic stitch & trim seam might be your best choice. It can really be used on any fabric weight, but those that fray easily would benefit from a different finish.

Like most seams, the stitch & trim begins with a plain seam. This is simple enough. Place your fabric with right sides together and pin. Put your fabric in the sewing machine and sew a straight line ⅝" from the raw edge of the fabric. Don't forget to backstitch for ¼" at both the beginning and end of your stitch so the thread doesn't unravel. Press the seam open with a warm iron so it lies flat for you.

Once you've done this, it's time to create the stitch & trim seam. Sew a line of straight stitching ¼" from the raw edge of the seam allowance. Do this to each side separately and press flat again. Make sure you backstitch to keep your stitching in place. It does you no good if it unravels as soon as you've pulled it from the machine.

Once you've flattened your seam, it's time to trim. Cut away the excess fabric at the raw edge of the seam allowance using a pair of sharp scissors. Get close, but not so close that you clip the stitching. Once you've trimmed, press the seam open again so it lies flat.

Mastering this seam allows you to move on to more complex seams such as French, bound, and Hong Kong seams.