Large Cloak for Sale, Turquoise with White Lining

This item has been sold.

This turquoise cloak spent 18 months as a display cloak (floor model). It was never worn, but did spent most of that time on a mannequin. A change in the colors in the shop means this cloak is now for sale. Also, we no longer have these fabrics available, so there won't be any more of these cloaks (in these particular colors) once this last one is gone.

The shell of this medieval cloak is a turquoise damask cotton with an embossed rose print (which is almost impossible to see in the photo). The lining is thick white cotton with an embossed dandelion print. Again, this is hard to see in the photo. Both fabrics are fairly heavy, making this a wonderfully warm cloak. It closes with a pewter clasp and has a lovely drape due to the weight of the fabrics used in its construction.

The cloak itself is large enough to fit most people. I would call it a large cloak, but it can be worn by most adults who wear size large or smaller. It will brush the floor on anyone under 5'6"tall. If you're shorter than that, it will drag on the floor. This gothic cloak is definitely considered full-length. The hood is large and deep (though thrown back in the picture).

Since this is a floor model, there might be some minor markings, especially on the lining. The markings on the lining are not noticeable when the cloak is worn. The shell is in near-perfect condition with no marks that I can see. These cloaks retail for $59.99, but since it's a floor model bidding starts at less than half that price.

Knitting Patterns: Beanie Hat

I love to knit. It's a great way to pass the time when I'm not in the middle of a sewing project that needs attention. I like to sit and knit while watching my favorite movies. Usually I'm making whatever my kids have asked for. Yesterday, it was a beanie hat, often called a toque. Making one yourself is actually very easy. All you need is a couple balls of yarn, a circular sewing needle (I like US size 7, but you can use a different size if you like), four or five double point needles of the same size, a tapestry needle, and a free afternoon. You'll also need to know how to make a basic knit stitch and a basic purl stitch.

Start by casting on your stitches onto the circular needles. How many you need is determined by how large the hat must be. The hat in the picture was made using a hundred stitches. It fits my five-year-old son. You can make a hat using many more stitches, but make sure the number you use is divisible by four. For example, you can make a hat using 124 stitches, but not 125. Trust me, this is important.

Once you have your stitches cast on, join them so they're in a circle on the circular needles, making sure not to twist the stitches. Also make sure you use a stitch marker so you don't lose track of where you started. Now you can begin a simple rib stitch. Knit one, purl one, repeat. See, simple. Continue the rib stitch for six rounds, more if you want a thicker rib around the base of your hat. Keep your stitch marker in place, making sure not to drop it. That stitch marker should stay exactly where it is until you've finished the hat, so just keep transferring it from needle to needle.

After you've completed the rib section of your hat, you can forget all about having to purl. The rest of the beanie is only a knit stitch. Knit until you are at least six inches from the edge of the hat, maybe a little more depending on the size of your forehead. At this point, you can add the stripes of color seen in the photo. Add two rounds of a contrasting color, then three of your base color, then two more of your contrasting color to get the effect you see in the photo. You can change the patter as you desire, but once you've added seven or eight additional rounds, it's time to start decreasing your hat.

This is where being able to divide your stitches by four is essential. Knit one more round, but count out your stitches, adding three more stitch markers as you go. You should end up with four stitch markers evenly spaced. I like to add a fifth stitch marker to the first one so I still know exactly where I started. This keeps your hat nice and even as you decrease.

So, decreasing. It's really not that hard. You'll have to be able to knit 2 together and perform a slip, slip, knit, but you can find videos for these on YouTube. Basically, you knit 2 together after each stitch marker and slip, slip, knit right before each stitch marker. This reduces your total number of stitch by 2 for each stitch marker, so you'll have eight fewer stitches after each completed round.

Continue to knit, decreasing at each stitch marker. At some point, you'll have to switch to the double pointed needles because you won't have enough stitches left to continue on the circular needles. I like using five needles for this, but you can do it with four. It doesn't work with three. Continue knitting on the double pointed needles until you have fewer than ten stitches left.

At this point, you should cut a ten inch tail of your yarn. You won't need more than that to finish off the hat. Thread the end onto your tapestry needle, thread the tapestry needle through the remaining stitches, and tie off the yarn on the inside of the hat (because your hat will look funny if you tie it off on the outside).

You should now have a completed hat. Maybe now you'll want to make a coordinating scarf. I know I did.

And for those who need a little help with slip, slip, knit.

Caring for Wool Sweaters

Wool is a marvelous fiber. It's comfortable, warm, and attractive. However, if not cared for properly, it can shrink, lose its shape and sometimes even unravel completely. In order to prevent this from happening, wool sweaters should be cared for in very particular ways.

Wool sweaters should not be cleaned too often. Excessive cleaning can break down the wool fibers. Only wash your sweater when absolutely required. When you do wash your sweater, it is probably best that you follow the care instructions on the tag. Most tags will indicate that your wool garments should be dry cleaned.

However, it is possible to wash your wool sweaters and other garments in the washing machine. If you choose to do this, use a mild detergent that is specifically formulated for wool. Biological detergents, or anything that contains bleach, will be disastrous to wool fibers. Read all the fine print of your favorite detergent to determine if it’s safe for your wool sweater.

Select the slowest spin speed and lowest temperature possible when machine washing any wool garments. Higher spin speeds could cause your sweater to stretch, while hot water can shrink your garment beyond all repair. If your machine has a wool care setting, use that. Otherwise, a cold water delicate wash will usually suffice.

Do not dry your wool garments in the dryer. Any heat applied to wet wool can (and usually will) cause shrinkage. Instead, lay your wool sweaters flat to dry. You can purchase a rack for drying your sweaters that allow them to be laid flat while permitting airflow from all sides. The wool will dry quickly and your sweaters will maintain their shape. If you notice that your sweater is slightly out of shape, stretch it gently before it’s dry.

Pilling is a common problem with wool sweaters, and it really cannot be avoided. This makes the sweater look untidy and a little ratty. However, when you do notice little pills and bobbles appearing on your sweater, you can treat the sweater by either plucking the pills off with your fingers or shaving the sweater gently. After a few washes, pilling will become less of a problem.

Wool sweaters are very attractive for moths, and once eggs are laid and the larvae hatched, they feed on the wool fibers. Most people would reach for the mothballs, but these can actually damage your wool sweater. Instead of mothballs, consider storing your wool sweater wrapped in plastic and sprinkled with lavender.

For more long-term storage, consider placing the lavender in a sachet with rosemary and dried orange peel. Place this near, but not on, your sweater to avoid any possible damage. Then place both the sweater and the sachet into a cardboard box, canvas or muslin bag, or simply wrap in an acid-free tissue paper.

The better you care for your sweater, the longer it will last. Clean your sweater only when necessary, store it carefully, and rinse any stains immediately with cold water. You should get years of life out of your wool sweater if you're careful.

First published as How to Care for Wool Sweaters

How to Embroider Faces on Cloth Dolls

There are many methods by which you can stitch the face onto a cloth doll. It can be done before the doll is assembled, during assembly, or after the doll is completed. Most of the time, it is easier to stitch the face onto the doll after the doll has been stuffed. This allows you to place the face exactly where you wish and the firm surface means your stitches will probably be more even. If you’re hoping to stitch the face onto a cloth doll, there are certain steps and tips that will make the process easier.

Thread Selection

When choosing a thread, the type and content of the thread is not nearly as important as its thickness. You’ll have to select a thickness that matches the size of the doll. For most dolls, embroidery thread will do. Depending on the delicacy of the doll, you may have to split the thread three times or more. For very large dolls, you may have to use wool. Choose a thread that gives you the desired results. A thread that is too thin won’t show up and one that is too thick will make your doll look chunky.

Creating the Face of the Doll After Stuffing the Head

If you’re stitching onto a head that is already stuffed, you’ll have to use stitches that allow you to conceal the end of the thread. If the head is not already attached, consider sliding the needle inside the head to start your stitches. The thread will be hidden inside the doll. As an alternative, you could a double stitch on the outside of the doll. This encases the thread, not only hiding the end but preventing the threads from being pulled out. There is nothing as annoying as finishing your embroidery and having the entire thing unravel.

Start by drawing the face on the head with a thin felt tipped pen. You should use a washable pen just in case you make a mistake. When you’re satisfied with the face, select the specific thread colors you’d like. Typically, a doll will have red lips, dark pink nose, and black or brown eyes and eyebrows. However, the colors you select are highly dependent upon the style and type of doll. Select the colors that work best for your project.

Thread a sharp needle of the appropriate size and, if you do not wish to use a double stitch, go through the neck area of the stuffed head. Pull the thread up into the area to be embroidered, but hold on to the very end. You don’t want to pull it all out and have to start again. Resist the temptation to secure the thread by tying a knot in the end of it. Eventually this knot will work its way through the fabric, unraveling your embroidery. You have to secure the thread by stitching it into the stuffing.

To define the shape of the eyes, you must use a chain stitch. Do this by pushing the needle down into the face and back up though the face in the same movement. The stitch length should be small and neat. Before pulling the needle through and completing the stitch, wrap the end of your thread around the needle. When you pull the need through, it will form a chain. Additional stitches are completed in the same manner. When you’ve reached the beginning, draw the thread back into the head of the doll and down through the neck. Secure the threads with a double knot, pulling them taunt but not enough to crease or pucker the face.

The eyeballs are created using straight stitches in whatever manner best suits your doll. The nose can also be worked with straight stitches, and chain stitches once again for the mouth. Eyebrows are also usually worked in chain stitches, though if you want thick eyebrows, consider a few rows of straight stitches. Stitches are all secured in much the same manner as the eyes were, by drawing the threads though the neck.

Creating the Face of a Finished Doll

The stitches remain the same for a finished doll, but everything else is different and infinitely more difficult. You can try to put the needle through the back of the head, but you’ll have to use a needle long enough to ensure you get the placement right. A double stitch can be used to secure the thread on the front of the face, but in all other respects the stitching remains the same. This method is more difficult simply because it is harder to secure the thread. Hence the double stitch.

If stitching a face onto a finished doll is too complicated (and it often is), consider using appliques on larger dolls. You can make your own appliques out of bits of felt. In areas too small, you may have to use a permanent fine tip pen to create the look you want.

Creating the Face Before Stuffing the Head

If you want to stitch the face before assembling the doll, invest in a darning mushroom of the appropriate size. You can stretch the fabric over the mushroom and position the face correctly before you stuff the head. Darning mushrooms are available from most craft supply stores.

Using embroidery to create the face of a doll is both beautiful and safer. Faces created with beads, jewels, or other items can present a choking hazard for young children. Instead of creating something that might pose a danger for your children, considering embroidering the face of a doll. With a little practice, you will become a master of this delicate art.

First published at Helium: How to Embroider Faces on Cloth Dolls